Vibration velocity sensors

Designed to measure the vibration velocty amplitude in the emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

• DVA111.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA111.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
• DVA111.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud.
• DVA111.252 - cylindrical small-sized housing, connection to the terminal block, mounting on a stud;
• DVA111.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA111.214 / DVA111.252 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA111.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – 4-20 mA

Designed to measure the root mean square (RMS) value of vibration velocity in emergency protection systems (EPS);

Consist of a sealed housing, which is a acceleration sensor and conversion board;

Easily replace imported analogues;

Thanks to the version with connection terminal block inside the case (DVA121.352), the incoming cable is quickly and conveniently mounted;

For DVA121.352 - order available cable glands 3 types or nut;

Output signal type – 4-20 mA;

Designed to measure the root mean square (RMS) value of vibration velocity in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

• DVA141.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA141.132 - triangular case, cable with 2PM connector, mount on 3 screws;
• DVA141.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
• DVA141.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud.
• DVA141.252 - cylindrical small-sized housing, connection to the terminal block, mounting on a stud;
• DVA141.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

DVA141.252 and DVA141.214 are analogues DVA121.3XX;

To install the sensor assembly DVA141.214 / DVA141.252 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA141.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – 4-20 mA

Designed to measure the root-mean square (RMS) value of vibration velocity in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

• DVA143.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA143.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;

Output signal type – by voltage with separate power supply;

Designed for measurement of the root-mean square (RMS) value of vibration velocity in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

• DVA144.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA144.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
• DVA144.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
• DVA144.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA144.214 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;  

DVA144.214 allows the use of cable assemblies with MIL connector from imported sensors; 

Output signal type – RS-485 (Modbus RTU) or RS-485 (Modbus RTU) + discrete output

Designed to measure the root mean square (RMS) value of vibration velocity on two axes simultaneously, comparing these values and issuing the largest of them;

In the sealed case there are integrated two-coordinate acceleration sensor and conversion board;

Sensor versions:

• DVA161.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA161.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
• DVA161.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
• DVA161.252 - cylindrical small-sized housing, connection to the terminal block, mounting on a stud;
• DVA161.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA161.214 / DVA161.252 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA161.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – 4-20 mA

Designed to measure the root mean square(RMS) value of vibration velocity on two axes simultaneously, vector addition of these values and the issuance of the resulting amount;

In the sealed case there are integrated two-coordinate acceleration sensor and conversion board;

Sensor versions:

• DVA171.104 - triangular case, all-in-one cable connection, 3-screw mount;
• DVA171.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
• DVA171.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
• DVA171.252 - cylindrical small-sized housing, connection to the terminal block, mounting on a stud;
• DVA171.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA171.214 / DVA171.252 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA171.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – 4-20 mA