RU EN

TIK-WSV vibration meter

TIK-WSV vibration meter

Designed to measure the root mean square value (RMS) of vibration velocity / vibration acceleration / vibration displacement along two axes and signal transmission via wireless interface LoRaWAN or wired mode via Modbus RTU data transfer protocol;

It's enclosed in a single housing built-in two-component accelerometer and electronic unit, processing the signal coming from built-in accelerometer and signal transmission;

Sensor versions:

  • TIK-WSV - cylindrical body, stud-mounted;
  • TIK-WSV RB - reduced size cylindrical body, stud mount, removable battery.

For installation on the unit, the standard stud M6 / M8 / M10 / M12 (M8x1 / M10x1.25 / M12x1) is used; for the special order it is possible to supply the studs with any thread, including inch;

Output signal type - digital (LoRaWAN protocol);

  • High range radio communications - up to 2 km (in dense buildings) and up to 15 km (subject to direct visibility);
  • Customizable data transfer interval; extraordinary data transmission mode when the threshold level of the measured vibration is exceeded.

Additional photos

specifications

Metrological parameters

  • Conversion coefficient / Range of indications of RMS vibration acceleration, m/s2
    1 / 0-100
  • Conversion coefficient / Range of indications of RMS vibration velocity, mm/s
    1 / 0-100
  • Conversion coefficient / Range of indications of RMS vibration displacement, μm
    1 / 5-300
  • Operating frequency range, Hz
    2-1000
    5-1000
    10-1000
    (for vibration velocity, vibration acceleration)
    10-200
    (for vibration displacement)

Interface

  • Output signal type
    digital
  • Protocol
    LoRaWAN
    Modbus RTU
  • Supply
    battery life up to 10 years
    (depending on conditions)
  • Device class
    A (according to LoRaWAN classification)
  • Number of packets sent by the device, not less
    50 000 (TIK-WSV)
    15 000 (TIK-WSV RB)

Explosion protection

  • Kind
    intrinsically safe circuit
  • Marking
    0Ex ia IIC Т4 Ga

Design parameters

  • Overall dimensions, mm
    Ø34,5x114 (TIK-WSV)
    Ø40x69 (TIK-WSV RB)
  • Weight, kg, not more than
    0,24 (TIK-WSV)
    0,22 (TIK-WSV RB)
  • Mounting type
    stud M6/M8/M10/M12
    (M8x1/M10x1.25/M12x1)
  • Protection class
    IP65/IP68

Operating parameters

  • Operating temperature range, ºС
    -40...+80 (climatic version H)
    -60...+80 (climatic version X)

Reliability parameters and manufacturer's guarantees

  • MTBF, hours, not less than
    40 000
  • Warranty service life, months
    24
  • Service life, years, not less than
    10
  • Time between verifications
    2 years
Service center