RU EN

Vibration acceleration sensors

selected: 0 compare
DVA241.XXX vibration acceleration sensors with current output DVA241.XXX vibration acceleration sensors with current output

Designed for measurement of the root mean square (RMS) value of vibration acceleration in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

  • DVA241.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA241.132 - triangular case, cable with 2PM connector, mount on 3 screws;
  • DVA241.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA241.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA241.252 - cylindrical small-sized housing, connection to the terminal block, mounting on a stud;
  • DVA241.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA241.214 / DVA241.252 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA241.214 allows the use of cable assemblies with MIL connector from imported sensors

Output signal type – 4-20 mA

Add to compare list
DVA244.XXX vibration acceleration sensors with digital output DVA244.XXX vibration acceleration sensors with digital output

Designed for measurement of the root mean square (RMS) value of vibration acceleration in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

  • DVA244.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA244.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA244.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA244.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA244.214 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA244.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – RS-485 (Modbus RTU) or RS-485 (Modbus RTU) + discrete output

Add to compare list
DVA252.XXX vibration acceleration sensors with voltage output DVA252.XXX vibration acceleration sensors with voltage output

Accelerometers are designed to measure the instantaneous value of vibration acceleration in diagnostic systems;

Sensor versions:

  • DVA252.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA252.132 - triangular case, cable with 2PM connector, mount on 3 screws;
  • DVA252.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA252.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud.

The sensors in the triangular case are very convenient for use in cavities and places where the cable entry from the top does not allow installation;

For installation on the sensor unit DVA252.214, a standard stud M8 / M10 / M12 is used; upon request, the stud can be delivered with any thread including the inch thread;

DVA252.214 allows using the cable assemblies with MIL connector from imported sensors;

Output signal type – two-wire voltage, IEPE (ICP compatible)

Add to compare list
DVA274.XXX vibration acceleration sensors with digital output DVA274.XXX vibration acceleration sensors with digital output

Designed to measure the root mean square (RMS) value of vibration velocity on two axes simultaneously, vector addition of these values and the issuance of the resulting amount in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

  • DVA274.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA274.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA274.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA274.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA274.214 uses the standard stud M8 / M10 / M12; for the special order it is possible to supply the studs with any thread, including inch;

DVA274.214 allows the use of cable assemblies with MIL connector from imported sensors;

Output signal type – RS-485 (Modbus RTU) or RS-485 (Modbus RTU) + discrete output

Add to compare list
IKV-1-1-2 type A vibration measuring channel IKV-1-1-2 type A vibration measuring channel

Designed for measurement the amplitude of vibration acceleration in diagnostics systems;

Consists of DV-1 (type 00, 02) vibration transducer, AV 112 charge amplifier and TIK-BIS.3X3.0X0X safety barrier installed in the connecting box (the box and the barrier are delivered at the request of the Customer);

Supplied complete with anti-vibration cable;

Output signal type – voltage two-wire (IEPE)




Add to compare list
IKV-1-1-2 type B vibration measuring channel IKV-1-1-2 type B vibration measuring channel

Designed for measurement the amplitude of vibration acceleration in diagnostics systems;

Consists of DV-1 (type 04, 05) vibration transducer, AV 112 charge amplifier and TIK-BIS.3X3.0X0X safety barrier installed in the connecting box (the box and the barrier are delivered at the request of the Customer);

Output signal type – voltage two-wire (IEPE)





Add to compare list
IKV 112.12 vibration measuring channel (high-temperature) IKV 112.12 vibration measuring channel (high-temperature)

Designed for measurement the amplitude of vibration acceleration in diagnostics systems;

Consists of DV-1T vibration transducer, AV 112 charge amplifier, installed in the connecting box;

Supplied complete with anti-vibration cable;

Output signal type – voltage two-wire (IEPE)






Add to compare list
Service center